RO Pure Water Treatment is the most precise membrane liquid separation technology. The operating pressure is applied on the side of the inlet water and the concentrated solution to overcome the natural osmotic pressure.
When the operating pressure higher than the natural osmotic pressure is dropped on the side of the concentrated solution water molecules naturally permeate the flow The direction will be reversed, and the water molecules in the influent concentrated solution pass through the reverse osmosis membrane to become the purified water om the dilute solution side Reverse osmosis suitable equipment can block all soluble salts and organic substances with a molecular weight greater than 100. but allow water molecules to pass through, The salt rejection rate of reverse osmosis composite membranes is generally greater than 98%.
RO Tratamento de Água Pura
Most of our projects use DOW Filmtec, Toray, Vontron, Hydranautics, LG brands. They are well-known brands in the water treatment industry.
The reverse osmosis membrane is the core element to realize reverse osmosis, and it is an artificial semipermeable membrane with certain characteristics made by simulating biological semipermeable membrane. Generally made of polymer materials. Such as cellulose acetate film, aromatic polyhydrazide film, aromatic polyamide film. The diameter of the surface pores is generally between 0.5 and 10 nm, and the permeability is related to the chemical structure of the membrane itself. Some polymer materials have good repellency to salt, but the permeation speed of water is not good. The chemical structure of some polymer materials has more hydrophilic groups, so the permeation speed of water is relatively fast. Therefore, a satisfactory reverse osmosis membrane should have an appropriate amount of permeation or salt rejection.
Additionally, commercial RO water treatment systems can incorporate chemicals such as anti-scaling (scaling inhibitors), anti-fouling, pH adjustment, sterilization and disinfection chemicals in the pre- or post-treatment. We keep a close eye on the water treatment industry and add new water technologies to our reverse osmosis water plants.
When checking the customer's water quality analysis report, sometimes due to scaling and scaling problems, we can use the CIP (cleaning-in-place) system to clean the membrane in the membrane shell to make the membrane longer life. It is a new type of water treatment technology most used in the water treatment industry.
Potência Elétrica de Sistemas Comerciais de Tratamento de Água RO
Para planta de purificação de água comercial precisa de 220-380V/50Hz/60Hz. Para maior capacidade especialmente para sistema de osmose reversa industrial, por causa da bomba de alta pressão, necessita de 380V 50/60Hz. No que diz respeito ao seu projeto comercial de máquina de filtragem de água por osmose reversa, verificaremos seu fornecimento elétrico e decidiremos fixar energia para você. Além disso, temos alguns métodos de economia de energia para reduzir o custo elétrico, as novas tecnologias de tratamento de água da Chunke ajudam você a reduzir seu maior custo para o funcionamento do sistema.
Antes de comprar o sistema de purificação de água comercial, você deve saber:
1. Capacidade de produção de água pura (L/dia, L/hora, GPD).
2. TDS de água de alimentação e relatório de análise de água bruta (evitar problemas de incrustação e incrustação)
3. O ferro e o manganês devem ser removidos antes que a água bruta entre na membrana de filtração de água de osmose reversa
4. TSS (Total Suspended Solid) deve remover antes da membrana do sistema de purificação de água comercial.
5. SDI (Silt Density Index) deve ser menor que 3
6. Certifique-se de que sua fonte de água não tenha óleo e graxa
7. O cloro deve ser removido antes do sistema comercial de tratamento de água
8. Tensão e fase de energia elétrica disponível
9. Layout do local para o sistema de osmose reversa comercial ROespecificação de operação para sistemas comerciais de tratamento de água RO
TDS de água de alimentação: 0 - 1000ppm
|
Dureza acima de 18ppm precisa de dosagem anti-incrustante
|
Turbidez deve ser
Removido
|
Temperatura máxima da água de alimentação: 42°C
|
Opere com resultados TDS mais baixos
Recuperação
|
H2S deve ser
Removido
|
Tolerância de pH: 3-11
|
Conteúdo máximo de ferro: 0.05ppm
|
|
Pressão de água de alimentação: 1,5 a 6 bar
|
Tolerância máxima da sílica: 60ppm
|
|
Contact us to learn more about our industrial reverse osmosis systems and commercial RO water plants. Our sales team and technical team will be happy to share new water treatment technologies for your project.